BelGas general purpose P32 pressure regulators are reliable precision units designed for instrumentation use. This regulator has 0.25" NPT connections and has output spring ranges of 0-30, 0-60 and 0-120Psig. This regulator does not have a dripwell or filter.

BelGas general purpose P50 and P50 NACE filter regulators with dripwell, are reliable precision units designed for instrumentation use in both standard and corrosive environments. This regulator has 0.25" NPT connections and has output spring ranges of 0-30, 0-60 and 0-120Psig.

BelGas Type P51SS regulators are designed for service with a wide variety of corrosive gases and enviro-ments. These regulators have 0.25"NPT connections and are available with output pressure ranges of 0-30, 0-60, 0-100 and 2-150Psi. They are also available with or without filter elements and manual or automatic drain drip bowls.

BelGas P39  is a high pressure regulator available in three different materials: Brass, Brass/Plated and 316SST (which conforms to NACE MR-01-75). This regulator has (3) 0.25" NPT connections and is available with output spring ranges of 0-30, 0-60, 0-120, 0-150, 0-225 and 0-500Psig (Brass only) and has a 5500Psig Max. Inlet

BelGas P37 is a high flow regulator with capacities up to 110 SCFM. This regulator is equipped with a PATENTED balanced pintle design which eliminates unsteady changes in outlet pressure due to inlet pressure fluctuations. This regulator is available with 0.50" & 0.75" connections and output spring ranges of 0-10, 0-30, 0-60 and 0-120Psig.

BelGas P627 is a spring loaded, direct-operated regulator for high and low pressure applications. It is available in 0.75", 1" & 2" models made of ductile iron or WCB carbon steel (NACE optional). Output ranges are 5-20, 15-40, 35-80, 70-150, 140-250 and 240-500Psig. Flow ranges vary from 300 SCFH to 140,000 SCFH.

BelGas P630 is a spring loaded, direct-operated regulator for high pressure, high flow applications. It is available in 1" & 2" models made of cast iron or WCB carbon steel (NACE optional). 316SST internals are standard. Output spring ranges are 27-50, 46-95, 90-150, 150-200, 200-275 and 275-500Psig.

BelGas Type 75 volume booster relay uses signal pressure to accurately control output pressure over a wide range of flow and supply pressure variation. It is available with signal to output pressure ratios of 1:1, 1:2, 1:4 & 1:6. Maximum output is 150Psig.